|
|
| |
|
| |
|
Warn Rock Sliders Body Protection
How many body shots can your Jeep absorb? A heckuva lot more with WARN Rock Sliders. The thick steel plate construction and black powder coat finish ensure durability. The plate bolts right to the Jeep body, reinforcing its weakest spot. Mounting hardware is included. Some drilling required.
 |
|
 |
 |
| |
|
| |
|
Warn Rock Crawler Series Front Bumper
Here's a bumper that replaces the factory bumper with function and style. Take a look at the sloped vertical surfaces. They're tapered and welded; designed to keep maximum approach angles clear and not act like a plow in deep snow or mud. The sides of the bumper continue around to the flare so they match the style-line and protect the body. Welded eyelets are ready for D-shackles and the winch mounting system is integrated and pull-tested for winches up to 9500-pound capacity. Made from 3/16" and 1/4" steel and black powder coated. Available with or without grille guard tubes. (Not rated for tow bar use.)
|
|
|
|
| |
|
| |
|
Warn Rock Crawler Series Rear Bumper
The WARN Rear Bumper for the Jeep Cherokee is designed with off-road performance in mind. This bumper sits high and tight, and is sloped to maximize departure angles and ground clearance. Welded eyelets will mount D-shackles, creating anchor points to increase your vehicle recovery options. The bumper is constructed of 3/16" and 1/4" steel that is laser cut, CNC formed and robotically welded for precise fit and durability. Available in black powder coat finish. Compatible with factory and aftermarket rear receivers. For carrying the oversize tires that off-roader's require, the rear bumper is available in a version that's designed to accept the WARN tire carrier.
|
|
|
|
| |
|
| |
|
Warn Rock Crawler Series Tire Carrier
Accessory to WARN rear bumpers. Built to carry heavier tires (up to 37"), this robust carrier has all the heavy duty features needed to make it hold up over the long run. This carrier pivots on a beefy 1-1/2" solid steel shaft pin, which comes up from within the bumper into the frame of the tire carrier. The shaft itself is welded, not bolted. A license plate mount and handle are integrated. Bumper sold separately.
|
|
|
|
| |
|
| |
|
Warn Steering Box Skid Plate
The full enclosure design has a tight, 1/4" clearance between the skid plate and steering box to keep excellent clearance from the big rocks. It also means full structural rigidity when the rocks hit. Large holes allow for debris clearance without sacrificing structural support. Made from 3/16" steel and black powder coated.
|
|
|
|
| |
|
| |
|
Warn Fuel Tank Skid Plate
Put some thick, 3/16" steel between your gas tank and the rough terrain your Jeep will conquer. The WARN Fuel Tank Skid Plate for the Jeep Wrangler not only adds extreme protection over the stock setup, it bolts directly onto the frame using the existing factory attachment points. On the Jeep Wrangler TJ model, the WARN Fuel Tank Skid Plate has a dropped center relief for proper fuel pump clearance and protection. Both skid plates feature drain holes to keep the plate free of debris. Durable black powder coat finish fights off rust.
|
|
|
|
| |
|
| |
|
Warn Oil Skid Plate
The unique design virtually eliminates rust creating welds. The skid plate is a bolt-on design with a frame attachment bracket that allows drive shaft travel. It also means easy conversion from a stock to lifted vehicle. Made from 1/8" and 3/8" steel and black powder coated.
|
|
|
|
| |
|
| |
|
Warn Transfer Case Skid Plate
The WARN Transfer Case Skid Plate provides protection to the transfer case in off-roading situations. The product bolts onto the crossmember and unibody structure. Hole drilling is required. Includes spacers for use on lifted vehicles with lowered crossmembers.
|
|
|
|
| |
|
| |
|
Warn Fender Flares
Specifically designed for serious off-roaders, these polyurethane flares resist impact from rocks, trees and other off-road obstacles. Trail Flares hold their shape and resist sagging, even at high temperatures. The smooth outer surface is easy to clean, and pre-drilled mounting holes (except for CJs) make for fast installation. Approximately twice as wide as factory flares, Warn Trail Flares provide coverage for wide tires and extra protection for the vehicle body.
|
|
|
|
| |
|
| |
|
Warn Heavy Duty Front Bumper with Brush Guards
Contoured to follow the shape of the grille and body, these bumpers look custom made. And they offer real protection. Its one-piece weld design incorporates a tubular grille guard, brush guards, round light ports and a concealed winch mount.
Key Features Include:
- All steel construction and powder coat paint in black
- 450+ inches of weld
Includes 5" 100-watt stainless steel spot lights and wiring kit
- Additional light mounting holes in top of bumper (lights sold separately)
- Re-uses factory tow hooks or comes with welded eyelets for vehicle recovery
- Special under coating helps to prevent underrusting of the paint if the paint film is scored or chipped
- Accommodates diesel applications and oversize tires
- Rated for use with the all WARN large frame winches including the 16.5ti.
|
|
|
|
| |
|
| |
|
Warn Heavy Duty Front Bumper without Brush Guards
Warn Industries expands its line of Heavy Duty Bumpers by offering these robust units without Brush Guards. The updated configurations include a new black powder-coated wrinkle finish.
Key Features Include:
- All steel construction and black powder-coated wrinkle finish
- Light mounting holes in top of bumper (lights sold separately)
- Light mounting holes in front of bumper for 5" lights (lights sold separately)
- Re-uses factory tow hooks or comes with welded eyelets for vehicle recovery
- Special under coating helps to prevent underrusting of the paint if the paint film is scored or chipped
- Accommodates diesel applications and oversize tires
- Rated for use with the all WARN large frame winches including the 16.5ti.
|
|
|
|
| |
|
| |
|
Warn Off-Road Winch Bumper
To accommodate Toyota FJ Cruiser off-road enthusiasts who want a versatile front bumper with the ability to mount a winch, Warn Industries has released a front winch bumper application for use on this popular SUV.
This durable unit has welded one-piece construction for excellent strength and minimal deflection under load, and an integral winch mount to accept WARNŽ mid-frame winches (up to 12,000 lbs.). Other features include auxiliary light brackets to accommodate WARNŽ lights (up to and including the SDB-210); an integrated guard for grille and headlamp protection; and lower fog lamp mounts, suitable for low-profile lamps.
This bumper is powder-coated black with a wrinkle finish for good looks and outstanding durability.
|
|
|
|
| |
|
| |
|
Warn Off-Road Winch & Bumper Kit
This is one aftermarket product that really benefits the Hummer H2 owner: the WARN Winch/Bumper Kit that's compatible with the Hummer factory grille guard. It gives you a 9,500-pound capacity, hardcore-duty, WARN 9.5xp winch. PLUS a companion heavy-duty, 1/8", 11-gauge steel bumper (with 1/4" steel mounting brackets). A durable powder coating finish keeps the bumper looking great.
Key features include:- Retains factory tow loops
- Easy access to clutch lever
- Easy access to remote control plug-in
- Minimum effect on approach angle
- Works with Hummer accessory grille guard
- Works with Hummer accessory fog lights
Overall, the bumper fits high and tight, preserving the H2's approach angle for superior off-road performance.
|
|
|
|
| |
|
| |
|
Warn Hidden Winch Mount
Some vehicle owners want the benefits of a WARN winch, but don't want to change the lines of their vehicle. So WARN engineers have created a hidden mounting system that mounts the winch using factory frame holes and retains the original bumper.
Winch mounts behind factory bumper, preserving the truck's original look and style. Winch bolts to a winch carrier that is engineered to properly distribute the winch load to the truck's frame.
|
|
|
|
| |
|
| |
|
Warn Winch
Warn Industries has taken MOSFET (Metal-Oxide-Semiconductor Field-Effect-Transistor) technology and put it to work for serious off-roaders.
The 9.5si MOSFET control module eliminates the solenoid pack and its electro-mechanical functions. Operating temperatures from -40 to +180 degrees won't faze it. Voltage drop to the winch is minimal for more efficient operation and low heat gain.
With it's extreme sealing system and the 12.5 lb aluminum die-cast body, the 9.5si is the winch for the really serious user who requires the ultimate in reliability, durability and control.
|
|
|
|
| |
|
| |
|
Warn Portable Winch
The 9.5ti Multi-Mount packs 9500lbs of portable pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first - operator feedback - the thermometric indicator gives the operator information about motor temperature during the winching operation.
The 9.5ti Multi-Mount includes winch, ti remote, carrier, 7.5' power lead with quick connect plug for front of vehicle and hawse fairlead. Front receiver and rear power lead sold separately.
|
|
|
|
| |
|
| |
|
Warn PowerPlant HP Winch/Air Compressor System for Off-Roaders
For Off-Road Enthusiasts
You want the best-equipped vehicle on the trail, so you need the WARN PowerPlant HP. A potent air compressor and a winch with fast line speed will help you lead the pack on the toughest trails.
- A premium on-board air compressor and a winch with fast line speed are perfect for off-road enthusiasts.
- Rapidly air up tires and power air tools, such as an impact wrench for changing a tire.
- Self-contained unit is easy to install with no additional wiring or plumbing necessary. That means more time on the trail and less time in the garage. Additional accessories let you use the PowerPlant to its maximum potential.
|
|
|
|
| |
|
| |
|
Warn PowerPlant HD Winch/Air Compressor System for Work Trucks
When you want the best tool for the jobsite, you want the WARN PowerPlant HD.
With a powerful air compressor and an amazingly strong winch, you'll be able to get more done in less time.
- A powerful air compressor combined with a high-duty winch lets tradesmen, farmers, and ranchers get more done in less time.
- Runs air tools such as nail guns and impact wrenches, so there's no need to lug a large, cumbersome air compressor to the jobsite.
- All-in-one unit is simple to install so you can spend more time working. Accessories, such as Auxiliary Air Tanks and Plumbing Kit are available to store more air on your truck.
|
|
|
|
| |
|
| |
|
Warn Trans4mer Series Grille Guard
Of all the WARN mounting systems, the Trans4mer Mounting System offers the most versatility. It can be configured in dozens of different ways to match how you work (or play) with your truck. The foundation of the Trans4mer System. The grille guard comes with two uprights and two crossbars, and bolts directly to the vehicle frame. It is a required component because it provides the base for all other options. Whether you choose a Trans4mer system in powder-coated black, stainless steel or a combination, you'll be getting a simple, bolt-on system that installs around the factory bumpers.
|
|
|
|
| |
|
| |
|
Warn Trans4mer Series Brush Guards
Add-on accessory to Warn Trans4mer Series Grille Guard. Add style and protection with brush guards that complement your vehicle's lines.
|
|
|
|
| |
|
| |
|
|
Warn Winch Carrier
Add-on accessory to Warn Trans4mer Series Grille Guard. For a fixed winch mount, you'll need to add the Winch Carrier.
|
|
|
|
| |
|
| |
|
Warn Stainless Steel Winch Cover
Add-on accessory to Warn Trans4mer Series Grille Guard. You'll also want to take a look at the stainless steel SST Winch Carrier Cover. It bolts over the carrier to give a smooth, contoured and integrated look to the Trans4mer.
|
|
|
|
| |
|
| |
|
Warn Rear Off-Road Bumper
To accommodate Toyota FJ Cruiser off-road enthusiasts, the Warn Rear Off-Road Bumper fits around the factory receiver hitch and accomodates the back-up sensors (if so equipped). It has welded eyelets for D-shackles and there's a recessed area allowing up to a 33" tire to be transported on the factory tire carrier. The bumper is powder-coated with a black wrinkle finish for good looks and outstanding durability.
|
|
|
|
|
